簡體中文
English
The
product consists of a clamping rod, a V-shaped clamp, a clamping ring,
and a clamping head precision differential cylinder (with an accuracy of
1 grid 0.01mm), and V-shaped grooves are carved in the three directions
of the clamping head to facilitate the clamping guidance of the
injection needle or electrode. The PEI material of the clamping head has
electrical insulation performance, radiation resistance, high and low
temperature resistance, and wear resistance, and can pass through
microwaves. PEI also has good flame retardancy, chemical resistance, and
electrical insulation properties. Used for micro syringe administration
experiments, it can simultaneously fix the syringe barrel and needle,
making the clamping of the syringe more stable. The clamping range of
the syringe barrel is 3mm-12mm, and the clamping range of the syringe
needle is 0.3mm-1.5mm.
In the operation of brain stereotaxic
devices, it is often necessary to perform microinjection on animals. A
manual microinjection pump can be used, which is convenient to use. The
syringe syringe can be directly installed on the gripper, and the
precise movement of the syringe piston can be controlled by a micro
thruster to directly inject or recover liquid from experimental animals,
avoiding errors caused by the use of catheters. This injection pump is
compatible with most imported and domestically produced microinjectors
(1ul -100ul), with a displacement accuracy of 10 μ m (meaning that for
every small grid rotation, the syringe piston advances by 10um), and can
advance up to a distance of 25mm.
This product is an upgraded
economy version of the M5120 injection clamp; Compared with more complex
electronic controlled brain stereotaxic devices, manual microinjection
pumps are cheaper and easier to operate.
Ordering Information
